The CLAD-LIFT 350 is designed to handle glass, windows, panels, doors or other elements up to 350 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal.
The front driven Clad-Lift 350 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem .
The CLAD-LIFT 350 consists of the following modules:
Powerful front-wheel drive ensures best handling, both indoors and outdoors.
Both front drive wheels are equipped with electronic brakes.
The vacuum pump with "Power Save", ensures saving battery resources .
Sophisticated protection against overloading for maximum safety:
If 90% of the maximum load is reached, a red LED flashes on the control panel and a pulsing sound is heard. When 100% of the maximum load is reached, the red LED on the control panel lights up constantly and the acoustical signal sounds continuously.
In case of overloading, all hydraulic cylinders can operate in return only.
Lifting arm with manual, horizontal adjustment ( up to 100 mm ) for the precise positioning of the workpiece.
The lifting beam can be up-lifted with load to approx. 2850 mm.
The tower function allows hydraulic lifting or lowering by 500 mm.
The telescopic extension of the lifting beam makes the fast and exact fitting of windows possible while the number of required staff is reduced.
The multi-way front on the lifting beam makes the load movable in all dimensions. The workpiece can be turned 180°. The front can be manually moved sideways, turn 90 ° to the right and left, and rotate 360 ° endlessly. This is made possible by the integrated 2-circuit vacuum rotation system.
The multifunctional control panel is user-friendly designed and equipped with integrated function buttons and signal lamps. It is also provided with a spiral cable that enables the user to control the machine even when he is in the area of the workpiece e.g. a window that has to be fitted etc. .
Driving is controlled by the ergonomic operator steering handle. This handle ist provided with safety functions that meet even the most stringent safety standards. The emergency stop secures the operator against crushing hazard and the spring-loaded accelerator switch ensures that the machine immediately brakes if the handle is released .
Low-maintenance bearings and plain bearings ensure long life and low maintenance costs .
The integrated battery charger makes charging via a 230V socket possible anywhere anytime. The charging time is approximately 8 hours .
The CLAD-LIFT 350 is a revolution in window installation. It can lift up to 350 kg objects, and it is the ideal solution for workers that often are faced with heavy lifting tasks. The CLAD-LIFT can be used for variety of applications, the machine is sold with various accessories for mounting windows or special toolings for other tasks.
|Article No.||1016050||Min. Extension||550 mm|
|Outer length:||1.450 mm||Max. Extension||1.050 mm|
|Outer width:||690 mm||Max. Height to center of lifting yoke:||2.850 mm|
|Max. Lifting capacity: approx||350 kg||Side shift ( manual ):||100 mm|
|Max. Load at maximum extension: approx||200 kg||Tower fine adjustment ( hydraulic ):||500 mm|
|Weight including ballast weight||617 kg||rotation||360°|
|Weight without ballast weight||512 kg||Suction plates:||4 x Ø 270 mm|
|Ballast weight||7 x 15 kg||Batteries:||2 x 95 Ah|